Laatste Nieuws


Beste Fietsliefhebbers,

Na onze succesvol afgeronde Kickstarter campagne afgelopen November zijn we trots dat de BikeClip nu in Nederland is. Na een uitgebreide en grondige kwaliteitscontrole in ons warehouse is de BikeClip klaar voor het grote publiek en vanaf nu te bestellen via onze gloednieuwe website en webshop.

Afgelopen week zijn de meer dan 350 pre-orders van Kickstarter, IndieGoGo en Facebook verstuurd en is de BikeClip wereldwijd zeer goed ontvangen. Eerste reviews en foto’s staan op onze website en social mediakanalen.

Ga nu naar onze webshop https://getbikeclip.com/ en vul de kortingscode BC_082017 in bij je eerste bestelling en ontvang de hele maand augustus 10% korting op je BikeClip Essential of Extended.

We willen nogmaals iedereen bedanken voor de steun die jullie ons gegeven hebben. Dit heeft ervoor gezorgd dat BikeClip tot leven is gekomen!

Team BikeClip



 Dear Backers,

Yes, yes, yes, finally!!!

We are so happy to inform you that the BikeClips are ready for delivery. Our team worked around the clock to make sure the BikeClips are now on their way to your homes as fast as possible. For international shipments, please have a little bit of patience, as this might take a few days for our logistics partners to deliver them globally.

Once again, thank you all for your fantastic support!

Team BikeClip

 

 



Dear Backers,

Please find here a new update on production progress and shipping. Besides good progress, see pictures. We unfortunately experienced a unexpected setback and thus a corresponding delay due to a broken mold of the metal inlay plate / new arm pieces. We have solved the problem and are back in production! New estimated delivery of your BikeClip will be end of July/early August.

To ease the waiting a bit, we decided to add a BikeClip Drink Bottle for all of you.

Greetings,

Team BikeClip

————————————————————————————–

Current ETA’s and developments:

• March 2017 Production of filler caps – finished!

• March 2017 Production of the Base part – finished!

• March 2017 Production of the Design Cover – finished!

• March 2017 Production of the Travel Bag –finished!

• March 2017 Production of the Aluminum struts – finished!

• March 2017 New mold silicon protection sleeves – finished!

• March 2017 New design metal inlay plate – finished!

• March 2017 New mold arm pieces – finished!

• April 2017 Production silicon protection sleeves – finished!

• May 2017 Production metal inlay plate – in production / delayed due broken mold

• May 2017 Production new arm pieces – in production / delayed due broken mold

• June 2017 Product assembly – in preparation / delayed due broken mold

• June 2017 Sea freight container transport to our Dutch warehouse

• Mid July 2017 ETA to our Dutch warehouse

• End July 2017 Final Quality check

• End July/early August 2017 Final delivery of your BikeClip (globally)

 

 

 

 



Dear Backers,

Please find below the latest update on production progress. Proto’s coming out of new molds have been checked, approved and look great! Production is now running at full speed.

Greetings,

Team BikeClip

————————————————————————–

Current ETA’s and developments:

• March 2017 Production of filler caps – finished!

• March 2017 Production of the Base part – in production  

• March 2017 Production of the Design Cover – in production

• March 2017 Production of the Travel Bag –finished!

• March 2017 Production of the Aluminum struts – finished!

• March 2017 New mold silicon protection sleeves – finished!

• March 2017 New design metal inlay plate – finished!

• March 2017 New mold arm pieces – finished!

• April 2017 Production silicon protection sleeves – in production

• April 2017 Production metal inlay plate – in production

• April 2017 Production new design arm pieces – in production

• April 2017 Product assembly – in preparation

• April 2017 Sea freight container transport to our Dutch warehouse

• May 2017 ETA to our Dutch warehouse

• Early June 2017 Final Quality check

• Early June 2017 Final delivery of your BikeClip (globally)

 



Hello BikeClip enthousiasts,

please check our new video where Maurice uses our new add-on, Bottom Bracket, soon available via our new web shop in our new website.

Before the Eastern weekend find below a new update on production progress. Things are moving!

Happy Eastern to you all and go out and ride!

Team BikeClip

 

Current ETA’s and developments:

• March 2017 Production of filler caps – finished!
• March 2017 Production of the Base part – in production
• March 2017 Production of the Design Cover – in production
• March 2017 Production of the Travel Bag –finished!
• March 2017 Production of the Aluminum struts – finished!
• March 2017 New mold silicon protection sleeves – finished!
• March 2017 New design metal inlay plate ready – finished!
• March 2017 New mold arm pieces – finished!
• April 2017 Product assembly
• April 2017 Sea freight container transport to our Dutch warehouse
• May 2017 ETA to our Dutch warehouse
• Early June 2017 Final Quality check
• Early June 2017 Final delivery of your BikeClip (globally)

 


Maurice-Ok.jpg

BikeClip Kickstartercampaign got funded in 13 days. ‘’We are amazed how quickly we have achieved our goal of EUR 20.000. What an exhilarating ride it has been and there are still 19 days to go!’’, CEO and founder Paulssen. 72 supporting backers pledging EUR 20.057 and ordering 235 BikeClips in total. Paulssen: ‘’We will go on with our Kickstarter campaign for the next 19 days. We will keep our fans updated in the coming two weeks about all our progress in manufacturing, shipping and all other developments. Thank you so much everybody!’’


Kickstarter.png

Dear fellow bike maniacs,

One year ago I decided to bring my idea to create an innovative one size fits all bike stand for consumers to life. Today I can proudly let you know that BikeClip is NOW live on Kickstarter! Back us at https://www.kickstarter.com/projects/getbikeclip/bikeclip.


Seabourne-1200x751.png

Entirely in the spirit of the Triple Helix policy of the City of Eindhoven, LUMO labs startup ‘BikeClip’ chooses Seabourne Supply Chain Eindhoven as their preferred fulfillment partner. According to one of LUMO’s founders Jordie Geuyen a logical choice.


Door gebruik te maken van deze website, ga je akkoord met het gebruik van cookies. Meer informatie

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close